Land Rover New Defender 110 Slimline II Roof Rack Kit
Introduce your Defender to new adventures with this New Defender Foot Rail Kit. Engineered to get your Defender through the world’s roughest terrains while complimenting the sleek design, your Defender will be at home both on, and off-road.
- This 2166mm/85.3" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 Foot Rails to mount the Slimline II Tray to your New Defender 110. Easy fitment using OEM mounting points. The OEM Tracks need to be removed when fitting this Foot Rails Kit.
- All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle. The vehicle specific foot rails have openings for storing compatible gear under the rack such as Front Runner tables.
- These Foot Rails contain 2 openings to access Front Runner under rack mount tables (1 smaller prep and 1 larger camp size table).
- The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
- To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.
- If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
- If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
- All Front Runner Racks are backed by a Limited Lifetime Warranty
Note: The Land Rover OEM ladder & OEM storage box is not suited with rack fitment.
- 1 x FALD008 - Land Rover Defender L663 (2020-Current) Foot Rails - by Front Runner
- 1 x RRSTD11 - Slimline II Tray - 1255mm(W) X 2166mm(L) - by Front Runner
- Black epoxy powder-coated T6 aluminum
- 3CR12 Stainless Steel
Approximate Installed Weight:
- 32kg (70lbs)
- Width 440mm (17.3")
- Length 1730mm (68.1")
- Height 245mm (9.7")