• This 1560mm/61.4" long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 3 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Volkswagen Caddy (2010-2015). This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required.

• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

• Note: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.

• This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.

• All Front Runner Racks are backed by a Limited Lifetime Warranty*

• Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.

• For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.

• Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.

Specifications:

• Consisting of:

• 3 x GOFR001 - Rail Foot Base (Pair) - by Front Runner
• 3 x GOFR013 - Flush Rail Outer Grips / No. 4 - by Front Runner
• 3 x GOFR035 - Flush Rail Inner Grips / F - by Front Runner
• 2 x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
• 1 x RRSTA08 - Slimline II Tray - 1165mm(W) X 1560mm(L) - by Front Runner
• 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner

• Material Used:

• Black epoxy powder - coated T6 aluminum
• High strength steel

• Approximate Installed Weight: 27.7kg (61.2lbs)

• The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

• To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot, Grab-on Foot or Strap-On Foot listed above.

• If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

• If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
  

• Shipping Dimensions:

• Width: 1720mm (68.0")
• Length: 440mm (17.0")
• Height: 150mm (6.0")

• Shipping Weight:

• 26.9kg (59.0lbs)

Installation Instructions for GOFR001

Installation Instructions for RRSTA08