This Rack Kit is for truck canopies/camper shells/caps and trailers that have roof top sizes no larger than approximately 1425mm/56.1" (W) x 1358mm/53.5" (L). The Slimline II Tray and four (4) supplied Feet mount onto the OEM/Factory installed track of your canopy/shell or trailer. Note: Additional fasteners may be required to fit OEM/Factory supplied tracks.
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
In order for Front Runner Feet and supplied hardware to work with your OEM/Factory supplied canopy track, the track must have:
- Slot base width min 20mm / max 25mm
- Slot base height min 6.5mm / max 10mm
- Slot opening width min 8.5mm / max 10.5mm
- Slot opening height min 2mm / max 5mm
- 3 x FASS012 - Foot Set / 40mm-50mm - by Front Runner
1 x RRSTJ07 - Slimline II Tray - 1425mm(W) X 1358mm(L) - by Front Runner
- Black epoxy powder - coated T6 aluminum
- High strength steel
- Approximate Installed Weight: 23kg (50lbs)
The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.
If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
- Width 1425mm (56")
- Length 1358mm (53")
- Height 50mm (2")
Installation Instructions for FASS012
Installation Instructions for RRSTJ07