Subaru Ascent (2018-Current) Slimline II Roof Rail Rack Kit
You don’t need a permanent roof rack installation to unlock your next adventure. The Slimline II Roof Rail Rack Kit for the Subaru Ascent installs onto your factory rails, drill-free, with off-road tough feet. You can enjoy the utility of Front Runner rack accessories, while maintaining the ability to remove the rack at any time.
- This 1560mm/61.4” long, full-size, Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and 6 Grab-On Feet to mount the Slimline II Tray to the roof rails of your Subaru Ascent (2018-Current). This system installs easily with feet that grab on to the existing factory/OEM roof rails. No drilling required.
- All Front Runner Rack Kits contain installation instructions as well as all components needed to mount the Slimline II Tray to your vehicle.
- This rack kit can be removed to return your vehicle’s roof and rails to factory condition.
- All Front Runner Racks are backed by a Limited Lifetime Warranty.
- Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle owner’s manual for manufacturer’s recommended load rating.
- For optimal load-carrying capacity, we recommend that weight is evenly distributed across the rack, and that there is no cargo overhang (excluding sports gear).
- Factory Rail Rack Kits are not suited for extreme off-road conditions. Please consider a different Front Runner rack solution for that purpose.
- Please contact us for advice on mounting solutions for your specific vehicle and usage.
Note: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.
- Consisting of:
- 3x GOFR001 - Rail Foot Base (Pair)
- 3x GORR053 - Raised Rail Outer Grips / No. 4
- 3x GORR070 - Raised Rail Inner Grips / A
- 3x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
- 1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)
- Material Used:
- Black epoxy powder - coated T6 aluminium
High strength steel
- Approximate Installed Weight:
- 28.48kg (62.79lbs)
- The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
- To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
- If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
- If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
- Shipping Dimensions:
- Width: 440mm (17")
- Length: 1730mm (68")
- Height: 160mm (6")
- Shipping Weight:
- Weight: 29kg (64lbs)