Front Runner Ford Expedition/Lincoln Navigator (2018-Current) Slimline II Roof Rail Rack Kit

$1,485.00
$1,485.00

Ford Expedition/Lincoln Navigator (2018-Current) Slimline II Roof Rail Rack Kit 

You don’t need a permanent roof rack installation to unlock your next adventure. The Slimline II Roof Rail Rack Kit for the 2018-Current Ford Expedition or Lincoln Navigator installs onto your factory rails, drill-free, with off-road tough feet. You can enjoy the utility of Front Runner rack accessories, while maintaining the ability to remove the rack at any time.

Features:

  • This 1762mm/69.4" long, full-size, Slimline II Cargo Roof Rack Kit contains the Slimline II Tray, Wind Deflector and 6 Grab-On Feet to mount the Slimline II Tray to the roof rails of your Ford Expedition or Lincoln Navigator (2018-Current). This system installs easily with feet that grab on to the existing factory/OEM roof rails. No drilling required.
  • All Front Runner Rack Kits contain installation instructions as well as all components needed to mount the Slimline II Tray to your vehicle.
  • Rack kit can be removed temporarily so you can continue to use your OEM rails.
  • All Front Runner Racks are backed by a Limited Lifetime Warranty.
  • Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicle owner’s manual for manufacturer’s recommended load rating.
  • For optimal load-carrying capacity, we recommend that weight is evenly distributed across the rack, and that there is no cargo overhang (excluding sports gear).
  • Factory Rail Rack Kits are not suited for extreme off-road conditions. Please consider a different Front Runner rack solution for that purpose.
  • Please contact us for advice on mounting solutions for your specific vehicle and usage.

Note: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.

Specifications:

  • Consisting of:
    • 3x GOFR001 - Rail Foot Base (Pair)
    • 3x GORR054 - Raised Rail Outer Grips / No. 5
    • 3x GORR070 - Raised Rail Inner Grips / A
    • 1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
    • 1x RRSTJ09 - SLII Tray - 1425mm(W)X1762mm(L)
    • 1x WDST009 - Wind Deflector 20mm Lip Wide Pair / 1345mm(W)
  • Material Used:
    • Black epoxy powder - coated T6 aluminum
    • High strength steel
    • Approximate Installed Weight
      • 34kg (74.96lbs)
      • The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
      • To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
      • If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
      • If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
    • Shipping Dimensions:
      • Width: 440mm (17")
      • Length: 1730mm (68")
      • Height: 160mm (6")
    • Shipping Weight:
      • Weight: 35kg (77lbs)

     

     

     Click here for the Installation Manual

     Click here for the Rail Grip Feet