Mitsubishi Pajero SWB (2006-Current) Slimline II Roof Rail Rack Kit

Features:

• This 1156mm/45.5” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Mitsubishi Pajero SWB. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required.
• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
• Note: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.
• This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.
• Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.
• For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.
• Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.
• All Front Runner Racks are backed by a Limited Lifetime Warranty.

Specifications:

• Consisting of:
• 2 x GOFR001 - Rail Foot Base (Pair) - by Front Runner
  
• 2 x GORR052 - Raised Rail Outer Grab-On / No. 3 - by Front Runner
  
• 2 x GORR071 - Raised Rail Inner Grab-On / B - by Front Runner
  
• 1 x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
  
• 1 x RRSTA06 - Slimline II Tray - 1165mm(W) X 1156mm(L) - by Front Runner
  
• 1 x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair / 1165mm(W) - by Front Runner
• Material Used:
• Black epoxy powder - coated T6 aluminum
• High strength steel
• Approximate Installed Weight: 20kg (43lbs)

• The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

• To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.
  

• If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

• If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

• Shipping Dimensions:
• Width 455mm (18")
  
• Length 1610mm (63")
  
• Height 285mm (11")
• Shipping Weight:
• Weight 22.7kg (49.9lbs)

Installation Instructions for RRSTA06