Mitsubishi Outlander (2015-Current) Slimline II Roof Rail Rack Kit

Features:

• This 1358mm/53.5" long full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 3 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Mitsubishi Outlander (PHEV). This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required.

• All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

• Note: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.

• This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.

• All Front Runner Racks are backed by a Limited Lifetime Warranty.

• Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.

• For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.

• Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.

Specifications:

• Consisting of:

• 3 x GOFR001 - Rail Foot Base (Pair) - by Front Runner
• 3 x GOFR014 - Flush Rail Grab-On Outer Grips / No. 6 - by Front Runner
• 3 x GOFR034 - Flush Rail Grab-On Inner Grips / E - by Front Runner
• 1 x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
• 1 x RRSTD07 - Slimline II Tray - 1255mm(W) X 1358mm(L) - by Front Runner

• Material Used:

• Black epoxy powder - coated T6 aluminum
• High strength steel

• Approximate Installed Weight: 22kg (48lbs)

• The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

• To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot or Grab-on Foot listed above.

• If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/ 2") to the height of the Legs to determine the height of the rack from your vehicle’s rain gutters.

• If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/ 2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

• Shipping Dimensions:

• Width 450mm (18")
• Length 1615mm (64")
• Height 270mm (11")

• Shipping Weight:

• Weight 25.3kg (55.7lbs)

Installation Instructions for RRSTD07