Front Runner BMW X1 (2009-Current) Slimline II Roof Rail Rack Kit

$935.00
$935.00

BMW X1 (2009-Current) Slimline II Roof Rail Rack Kit

Features:

  • This 1156mm/45.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 4 Rail Grip Feet to mount the Slimline II Tray to the roof rails of your BMW X1. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required.

  • All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.

  • Note: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.

  • This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.

  • All Front Runner Racks are backed by a Limited Lifetime Warranty*

  • Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.

  • For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack. 

  • Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.

    Specifications:

    • Consisting of:
      • 2x GOFR001 - Rail Foot Base (Pair)
      • 2x GOFR015 - Flush Rail Outer Grips / No. 7
      • 2x GOFR036 - Flush Rail Inner Grips / G
      • 1x RRAC928 - Plastic Spacer for Rail Foot Base / 6mm (Pair)
      • 1x RRSTA06 - SLII Tray - 1165mm(W)X1156mm(L)
      • 1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm
    • Material Used:
      • Black epoxy powder - coated T6 aluminum
      • High strength steel
    • Approximate Installed Weight: 22.66kg (49.96lbs)
      • The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.

      • To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.

      • If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.

      • If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.

    • Shipping Dimensions:
      • Width: 440mm (17")
      • Length: 1730mm (68")
      • Height: 160mm (6")
    • Shipping Weight:
      • Weight: 22.6kg (50lbs)

     

     

     

     

    Installation Instructions for GOFR001

    Installation Instructions for RRSTA06