Volkswagen Atlas (2018-Current) Slimline II Roof Rail Rack Kit
This 1560mm/61.4” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Volkswagen Atlas. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required.
Features:
-
This 1560mm/61.4” long, full-size, Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 2 pairs of Grab-On Feet to mount the Slimline II Tray to the roof rails of your Volkswagen Atlas. This system installs easily with off-road tough feet that grab on to the existing factory/OEM roof rails. No drilling required.
-
All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
-
Note: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.
-
This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.
-
All Front Runner Racks are backed by a Limited Lifetime Warranty*
-
Factory Rail Rack Kits are designed as a "light duty" cargo solution. Please refer to your vehicles owner manual for manufacturers recommended load rating and do not exceed these limits.
-
For optimal load carrying capacity, we recommend that there is no cargo overhang (excludes sports gear) and all weight is distributed evenly across the rack.
-
Factory Rail Rack Kits are not suited for extreme off-road conditions and therefore you should consider a different Front Runner mounting solution if this is your intended purpose.
Specifications:
- Consisting of:
- 2x GOFR001 - Rail Foot Base (Pair)
- 2x GOFR013 - Flush Rail Outer Grips / No. 4
- 2x GOFR035 - Flush Rail Inner Grips / F
- 1x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
- 1x RRSTD08 - SLII Tray - 1255mm(W)X1560mm(L)
- Material Used:
- Black epoxy powder - coated T6 aluminium
- High strength steel
- Approximate Installed Weight: 26.67kg (58.8lbs)
- The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
- To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
- If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
- If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
- Shipping Dimensions:
- Width: 450mm (18")
- Length: 1730mm (68")
- Height: 200mm (8")
- Shipping Weight:
- Weight: 27.32kg (60lbs)