Front Runner Volvo V60 (2018-Current) Slimline II Roof Rail Rack Kit
Volvo V60 (2018-Current) Slimline II Roof Rail Rack Kit
This 1358mm/53.5" long, full-size Slimline II cargo roof rack kit contains the Slimline II Tray, Wind Deflector and 3 pairs of Rail Grip Feet to mount the Slimline II Tray to the roof rails of your Volvo V60. This system installs easily with off-road tough feet that grip onto the existing factory/OEM roof rails. No drilling required.
For a stronger expedition grade cargo carrying solution, Front Runner may offer a specific Foot Rail System to mount the Rack Tray to your vehicle. Front Runner Foot Rail solutions can be installed by removing the factory roof rails or used if no factory roof rails are fitted.
NOTE: Your vehicle must be equipped with the factory/OEM roof rails in order to use this rack kit.
- All Front Runner Rack Kits contain installation instructions as well as all the components needed to mount the Slimline II Tray to your vehicle.
- This rack kit can be removed leaving your vehicle’s roof and roof rails in their original condition.
- The t-slots on the tops and bottoms of the rack tray slats and edge profiles accommodate standard 8mm bolts.
- To determine the approximate height from your vehicle’s roof to the top of your Slimline II Roof Rack, add the height of the Slimline II Tray (50mm/2") to the height of the Foot or Grab-on Foot listed above.
- If your Slimline II Roof Rack kit uses Legs, add the height of the Slimline II Tray (50mm/2") to the height of the Legs to determine the height of the rack from your vehicle's rain gutters.
- If your Slimline II Roof Rack kit uses Foot Rails, add the height of the Slimline II Tray (50mm/2") to the height of the Foot Rails to determine the height of the rack from the crown (highest point) of the vehicles roof.
- All Front Runner Racks are backed by a Limited Lifetime Warranty.
- 3x GOFR001 - Rail Foot Base (Pair)
- 3x GOFR014 - Flush Rail Outer Grips / No. 6
- 3x GOFR032 - Flush Rail Inner Grips / C
- 2x RRAC904 - Plastic Spacer for Rail Foot Base / 10mm (Pair)
- 1x RRSTA07 - SLII Tray - 1165mm(W)X1358mm(L)
- 1x WDST011 - Wind Deflector 20mm Lip Extra Narrow Pair /1165mm
- Black epoxy powder - coated T6 aluminum
- High strength steel
Approximate Installed Weight:
- 52.82kg (116.45lbs)
- Weight: 440mm (17")
- Length: 1730mm (68")
- Height: 160mm (6")
- Weight: 25.8kg (57lbs)
Rail Grip Feet Installation Guide